The toughest HARZ Labs model resin: 12% elongation and 87 Shore D hardness, so study models, archive models and models with undercuts resist chipping and cracking. Natural ivory tone, 405 nm DLP/LCD. 0.5 kg and 1 kg bottles, with up to 30% off on bulk lab orders.
HARZ Labs Dental Model Ivory – Tough, Durable 3D Printing Resin for Dental Models
HARZ Labs Dental Model Ivory is the toughest of the HARZ Labs model resins. With 12% elongation at break and 87 Shore D hardness, Ivory models resist chipping and cracking, which makes it ideal for study models, models with deep undercuts and models that are handled, stored and re-used. The natural ivory tone looks close to real teeth.
Most model resins trade hardness for brittleness: a hard model chips at the margins or snaps at thin sections when a tray or appliance is removed. Ivory combines high hardness (87 Shore D) with the highest elongation in the HARZ range (12%), so models take knocks, repeated handling and appliance removal without cracking.
Toughest in the range
12% elongation, so models flex slightly instead of chipping.
Hard surface
87 Shore D for crisp anatomy that resists wear.
Natural tone
An ivory shade close to natural teeth, good for case presentation.
Easy to print
500–1000 mPa·s viscosity and a weak odour.
HARZ Labs Dental Model Ivory: study & durable models.
Applications
Study and diagnostic models
Archive models stored and re-used over time
Models with deep undercuts
Orthodontic models handled repeatedly
Case presentation models in a natural tooth tone
Ivory Dental model Resin Harz Labs By Dentinova
Compare HARZ Labs Dental Model Resins
HARZ Labs makes four dental model resins. They look similar in the bottle, but each formulation behaves differently, so choose the one that matches the work you print most.
“–” means the figure isn’t stated in the manufacturer’s data. All four are 405 nm DLP/LCD resins at the same price.
A dental model printed in HARZ Labs Dental Model Ivory.
Which HARZ Labs Model Resin Is Best for Your Work?
Clear aligner & retainer models
Best: Light Grey. It’s the only one with a documented 82 °C softening point, so models hold their shape under thermoforming heat and pressure.
Crown & bridge models and dies
Best: Beige. It’s the stiffest (3000 MPa) with the lowest shrinkage (under 0.3%), so dies stay rigid and margins stay accurate.
Implant & full-arch working models
Best: Beige. High rigidity and minimal shrinkage keep long-span and implant positions true across the arch.
Study, diagnostic & archive models
Best: Ivory. It has the highest elongation (12%) at 87 Shore D, so models resist chipping and cracking through repeated handling and storage.
Models with deep undercuts
Best: Ivory. Its toughness makes it less likely to snap when appliances or trays are removed over undercuts.
Training, education & presentation
Best: Peach. At 79 Shore D, the softer formulation is easy to trim and section, ideal for preclinical courses and patient demos.
Printing for several workflows? Many labs keep two resins on the shelf, for example Light Grey for orthodontics and Beige for crown and bridge. Ask us about mixed-resin bulk orders.
A High-detail Ivory dental model printed in HARZ Labs Dental Model Ivory.
Volume Pricing for Labs & Bulk Buyers
The more you order, the less you pay per bottle. Save up to 30% on HARZ Labs resins with our volume pricing for dental labs, aligner producers and clinic groups.
1–9 bottles
Standard price, as shown on this page
10–19 bottles
10% volume discount: a lower price per bottle
20–39 bottles
20% volume discount for busy labs
40+ bottles or regular supply
30% volume discount: our best lab pricing, with a quote tailored to your monthly volume
A Tough Durable Ivory dental model printed in HARZ Labs Dental Model Ivory.
Technical Properties
Material
Photopolymer resin
Technology
DLP / LCD, 405 nm
Appearance
Opaque liquid
Colour
Ivory
Elongation at break
12 ± 1%
Hardness
87 ± 2 Shore D
Flexural modulus
2300 ± 200 MPa
Viscosity (Brookfield)
500–1000 mPa·s
Odour
Weak
Manufacturing
ISO 9001 and ISO 13485 certified facility
Packaging
0.5 kg and 1 kg bottles
Printing & Post-Processing
All HARZ Labs model resins work with most 405 nm LCD and DLP resin printers, including the Anycubic Photon Mono M3 Max and the Elegoo Mars 4 and Saturn 3/4 series. HARZ Labs publishes recommended settings for each printer model, and we can help you dial in yours.
Remove the model from the build plate with a spatula, taking care not to scratch the plate.
Wash in IPA (isopropyl alcohol) or a recommended solvent to remove uncured resin.
Dry completely with compressed air.
Post-cure in a UV curing unit at the recommended time and temperature to reach full strength.
Good to know: don’t leave resin in the vat for long periods, and store bottles away from sunlight, bright LED light and heat. Wear gloves and eye protection when handling uncured resin.
Frequently Asked Questions
What is HARZ Labs Dental Model Ivory used for?
It’s used for durable study, diagnostic and archive models, models with deep undercuts, and orthodontic models that are handled repeatedly.
What makes Ivory different from the other HARZ model resins?
Ivory has the highest elongation at break (12%) combined with high hardness (87 Shore D). It’s the toughest, least brittle option, so models resist chipping and cracking.
Is Ivory suitable for models with undercuts?
Yes. Its toughness makes it less likely to snap at thin sections when trays or appliances are removed over undercuts.
Can I use Ivory for aligner thermoforming?
For thermoforming, we recommend Light Grey, which has a documented 82 °C softening point. Ask us about Ivory’s heat resistance for your specific process.
Do you offer discounts on bulk orders?
Yes. Order 10–19 bottles for 10% off, 20–39 bottles for 20% off, and 40+ bottles or a regular supply for 30% off, with a quote tailored to your monthly volume. Request a bulk quote.
Which HARZ Labs model resin should I choose?
Light Grey for aligner and retainer models, Beige for crown and bridge, dies and implant models, Ivory for durable study models and models with undercuts, and Peach for training, education and presentation models. See the comparison table on this page.
Which 3D printers are compatible?
Most 405 nm LCD and DLP resin printers, including the Anycubic Photon Mono M3 Max and the Elegoo Mars 4 and Saturn 3/4 series. Contact us for recommended settings for your printer.
Do you ship outside the UK?
Yes. We supply labs and clinics in the UK, Europe, the GCC and the US. Contact us for delivery times and costs to your country.
Ordering for a lab? The more you buy, the less you pay
10% off 10+ bottles, 20% off 20+ and 30% off 40+ bottles or regular lab supply.
Reviews
There are no reviews yet.